Princess Daisy is the princess of Sarasaland, who first appeared in the game Super Mario Land. She was created by Gunpei Yokoi, Shigeru Miyamoto’s mentor. Although Daisy is the ruler of Sarasaland, her current place of residence is in the Mushroom Kingdom.

You can download this paper model from:

HERE

This model is difficult in some places – nodules and tumors, the wind in the ears and lower part of the body is difficult, and A. SAN is essential. The construction of the series and is not trying to lose patience. Glue the head and body are filled with a stabilizing foot.

You can download this papercraft from:

HERE

Pointy Pichu (Pichu and ear notches) Golden Heart won / Seoul silver, if you have a particular color Ilex Forest Shrine little Pichu Pikachu are known to your computer. Shrine Pass, and the level of 30, Male facial expressions of Part V, and Swagger pain fractures. As Professor Elm, he discovered that traveled within Celebi. He added that the applicant can not be changed because it is a long time. Then, all connections to the Pokémon Center to prevent the participants pointed ears, Pichu used for commercial purposes.

Model is not difficult to build in the rule. Only hard part of the arm and the small thumbnail images. I suggest using pliers, press the thumb when the adhesive disc. As usual, to monitor the number of officers and use SAN. Reference (recommendation). Ear Pick is voluntary, we should build a left ear, and insert the pin, bend the cards in the middle, and add it to your ear. I am the brilliant structural net Marsh Pichu, had not contained a large version of the game. I did it, if someone build a simple shiny Pichu (without ear pictures) .
See original here:

HERE

How Hoppip Skiploom is the wind in the air. Fly flower than the propeller. Open flower on his head and closes when the temperature varies up and down, and flowers, when the temperature rises above 64F (18C). Therefore, it is sometimes used as a reference. Skiploom open the petals to absorb sunlight as possible. The air rises in the darkness approaches the sun. When it rains, the flowers in the vicinity of the Pokémon in the shade of a tree to hide, to stay dry. Promote the level of 18 and 27 should be the amount of Hoppip Jumpluff

Tips: Join each of the body pieces together from the top of the head downward, inserting in ears, arms and tail as you go. Close body at the bottom and then glue body onto feet. Use stick glue to attach top-side and bottom-side of each petal – this ensures that there is no bubbling/wrinkling of the paper. Then gently curl the double-sided petals around the edge of a table, before attaching it to the center part of the flower – bending the petal upwards at that center tab-join.

SKIPLOOM (Happy St. Patrick’s Day!)

THE PAPER MODEL
Height: 14.4 cm/5.6 in
Width: 17.7 cm/ 6.9 in
Depth: 10.8 cm/4.2 in
No. of Pages: 3
No. of Pieces: 26
Level: Medium
Designer: Brandon/Lyrin
Photo: Lyrin
NOTES: The model isn’t difficult to build overall. The only challenging parts are the arms and the tiny thumbs. I suggest you to use tweezers for holding the thumbs tabs while they glue. As usual, follow the numbers on the template, and use the .pdo as reference (recommended). A “normal color” texture is included too: I did so in case someone wanted to build a normal Pichu.

Read more:

PIKACHU-COLORED PICHU (HG/SS European Release Special)

THE PAPER MODEL
Height: 45.0 cm /17.7 in or 20.0 cm / 7.8 in
Width: 53.2 cm / 20.9 in or 23.6 cm / 9.2 in
Depth: 39.7 cm /15.5 in or 17.6 cm / 6.8 in
No. of Pages: 36 or 9
No. of Pieces: 106
Level: Medium
Designer: PMF
Photo: Skelekitty
NOTES: PMF and I have always loved Snorlax – we can totally relate to it’s lifestyle – so when I asked for a GIANT sitting version, PMF didn’t hesitate.

I did initially build the giant 45cm high model, but I accidentally printed the template out on the wrong weight paper (120gsm instead of 200gsm) and consequently the finished model was too fragile, and buckled out of shape under even the slightest pressure – much to the enjoyment of my 3 year old. So rather than print out all 36 pages again, I downsized it to 20cm, knowing that the template was buildable.

We have provided both sizes in the download packs. It’s a straightforward build: remember to print the giant version on heavier cardstock, start at the head, and work your way down in rings – follow the numbers of each piece – close at the soles of the feet. We have also included the Burger and Wiimote accessory =p

Originally posted here:

SNORLAX V2 (Giant version)

THE PAPER MODEL
Height: 15.0 cm/5.9 in
Width: 11.3 cm/ 4.3 in
Depth: 11.5 cm/4.5 in
No. of Pages: 3
No. of Pieces: 32
Level: Medium
Designer: Brandon / PMF
Photo: PMF
NOTES: Delibird is made of 5 parts: head, body, tail and feet. Start by building the body (page 1, all red) then build the 2 feet (yellow pieces on page 2). The rest of page 2 is the tail which you glue on the back and left foot, putting the left arm over it. Page 3 is the head with the beak being on page 1. Careful, there’s lot of spikes so use the pdo. Finally glue the head on the body, it should fit flat over the shoulders.
The rest is here:

DELIBIRD (Christmas Model)

151 / MEW – Pokémon Papercraft
Name: Mew
Type: Psychic
Species: New Species Pokémon
Height: 0.3 m (1′04″)
Weight: 4.0 kg (8.8 lbs.)
Interesting Facts: Mew is said to have the DNA of every single Pokémon contained within its body. It also vaguely resembles an embryo or fetus, and is often depicted in a pink orb and is genderless. Mew is a very curious and intelligent Pokémon that will only appear to someone with a pure heart. It loves playing around and swimming, and is known to behave very childishly at times, wanting everybody it trusts to play with it all the time. It is attracted to lullabies and will try to stay as close to the music as possible. All in all, Mew is known as a very happy and playful Pokémon. It is not known to evolve into or from any other Pokémon. Mew is the last Pokémon in the Kanto Pokédex.

THE PAPER MODEL
Height: 15.0 cm/5.9 in
Width: 12.3 cm/ 4.8 in
Depth: 34.3 cm/13.5 in
No. of Pages: 4
No. of Pieces: 34
Level: Medium
Designer: POdragon
Photo: Skelekitty
NOTES: This model is a little tricky to close, but if you accidentally stuff that bit up, rest assured that you can cover up the closing point with the tail! Start at the head and work your way down the belly, move to the feet, attaching the legs to the belly before closing up at the bottom. Build the tail from the tip down. Use super glue to attach the tail to the body.

Read the original post:

MEW (Skelekitty’s Anniversary Model)

See the rest here:

Mini Pokémon Birthday Cakes

THE PAPER MODEL
Height: 180 cm/7.1 in
Width: 125 cm/ 4.9 in
Depth: 236 cm/9.3 in
No. of Pages: 7
No. of Pieces: 73
Level: Hard
Designer: POdragon
Photo: POdragon
NOTES: This model is VERY hard, due to it’s complex geometry. You will definitely need to refer to the .PDO while building it. Be careful not to loose the tiny little parts, such as the teeth.

View original post here:

ARCANINE (POdragon’s Anniversary Model)

Gainax has released this official Gurren Lagann papercraft diorama that lets you recreate the famous battle scene in Episode 8 “Farewell, Comrades” of Tengen Toppa Gurren Lagann. Grab here.

BalthierBalthier (aka Balflear, aka Ffamran mied Bunansa) is a sky pirate that travels around Ivalice with his viera partner Fran and commands a small airship called Strahl. Grab at

here.

This is the nice papercraft for people who deep in love in paper model. Because it’s not easy to assemble but you will be prond in yourself if you already done it. Samus is the main character in Matriod games series. The first time that I play this game when I was young, I think she is a man. Because of her skill and her character (I can’t understand Japanese then I never know she is a woman untill the English version is come out).

Let’s enjoy with this model and free to show your finished model in our forum.You can download this papermodel from

HERE

Dante is a mercenary dedicated to exterminating demons, a task he follows in competition of those that killed his mother and corrupted his brother. He is the son of Sparda, a demon of great strength that rebelled castigate the demon king and defeated his legion. As a result of his demonic heritage he possesses numerous superhuman abilities which he uses in alloy with a variety of weapons to accomplish his goals. Created to link Hideki Kamiya ‘ s fantasy of a ” cool and stylish ” man, his specification was based on the titular character of manga series Cobra. The character has been well received by gamers, and has often been listed as one of video gaming ‘ s coolest characters.

Dante is a mercenary who specializes in supernatural cases, preferring those that name for demon slaying. He is muscular, has silver hair and is usually observed wearing red costume. Dante ‘ s arsenal usually consists of firearms and melee weapons, including ” Ebony and Ivory “, paired handguns that never obtain to be reloaded, as well as a variety of swords. The guns are hand – made with ” For Tony Redgrave, By. 45 Art Warks ” written on them. He has mystic powers, as a result of his half – demon heritage. This gives him the talent to enter a impermanent transformation called ” devil trigger “. In this area, Dante possesses supplementary speed, steady health regeneration, and additional abilities with his equipped melee weapon.
Ebony & Ivory.

You can download this paper model from Here 

Kart paper model from Crazy Racing Kart Rider game online from Korea. I never play this game before but their character is very cool. You can download this paper model from here

PDF version –>  Kart Rider FXT Paper Model

Gif version –>  Kart Rider FXT Paper Model

You also read the manual from the original page (in Korea) from Here